- Stock: In Stock
ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 0811-444-729 - Model: เอฟเฟคกีตาร์ Behringer OCTAVE DIVIDER
แป้นเหยียบเอฟเฟกต์เสียงอ็อกเทฟและริงเกอร์แบบแอนะล็อกคลาสสิก (Classic Analog Octave Divider and Ringer Effects Pedal)

แบ่งแยกและครองเวที (Divide and Conquer)
นักดนตรียุค 1970 มักมี “อาวุธลับ” ในชุดเอฟเฟกต์ของตน บางอย่างที่พวกเขาเปิดใช้งานกลางโซโล่สุดมันส์ หรือใช้สร้างเสียงแปลกใหม่จนเพลงกลายเป็นตำนาน เช่น David Gilmour กับเอฟเฟกต์ Phaser หรือ Jimi Hendrix กับ Octavia
หนึ่งในอาวุธลับที่ควรมีไว้ในบอร์ดเอฟเฟกต์ของคุณก็คือ Behringer OCTAVE DIVIDER
เพียงเปิดใช้งาน คุณสามารถสร้างริฟฟ์แจ๊สผสมเบสแน่น ๆ หรือเพิ่มเสียงปลายแหลมให้โซโล่ของคุณโดดเด่นขึ้นมาได้ในทันที
ใช้งานได้หลากหลาย ทั้งกับเบส คีย์บอร์ด หรือแม้แต่เครื่องดนตรีอย่าง “ไทรแองเกิลไฟฟ้า”

การจำลองที่แม่นยำ (Recreation Done Right)
OCTAVE DIVIDER ได้รับการออกแบบให้จำลองรุ่นดั้งเดิมจากยุค 70 อย่างสมบูรณ์แบบ มาพร้อมเอฟเฟกต์ซับอ็อกเทฟที่ให้เสียงทรงพลัง และสามารถปรับแต่งได้ด้วยปุ่ม Mixและ Tone เพื่อควบคุมสัดส่วนเสียงตรงกับเสียงอ็อกเทฟ และปรับโทนเสียงให้เหมาะกับสไตล์ของคุณ โดยยังคงไดนามิกและโทนเสียงดั้งเดิมไว้ได้อย่างครบถ้วน
สวิตช์ Bass Only ช่วยให้คุณสามารถตัดเสียงต้นฉบับออก เหลือไว้เพียงเสียงซับอ็อกเทฟ สำหรับสร้างไลน์เบสที่ซับซ้อนในระหว่างเล่นสด

เพิ่มลูกเล่นด้วย Ringer (Put Your Tone Through the Ringer)
OCTAVE DIVIDER ไม่ได้เป็นเพียงเอฟเฟกต์ซับอ็อกเทฟธรรมดาเท่านั้น แต่ยังมาพร้อมฟังก์ชัน Ringer ซึ่งเป็นวงจร ring modulator ที่ให้เอฟเฟกต์ย่านเสียงสูงและเอฟเฟกต์หลายโน้ตอันเป็นเอกลักษณ์ ช่วยเพิ่มมิติให้กับริฟฟ์ซับซ้อน หรือสร้างไลน์เบสที่กระชับและชัดเจนยิ่งขึ้น
สวิตช์ Stabilize ยังสามารถช่วยให้ระบบติดตามโน้ตแม่นยำขึ้น โดยเฉพาะเมื่อใช้กับเสียงเดี่ยว

พลังและความทนทาน (Power and Strength)
รุ่นต้นฉบับของ Octave Divider จำเป็นต้องเสียบปลั๊กกับไฟบ้าน แต่รุ่นใหม่ถูกออกแบบให้ใช้งานง่ายขึ้น โดยรองรับไฟ DC มาตรฐาน 9–12 โวลต์ ทำให้สามารถเชื่อมต่อเข้ากับอุปกรณ์สมัยใหม่ได้สะดวก
ตัวเครื่องทำจากโลหะคุณภาพสูง แข็งแรง ทนต่อการเหยียบใช้งานหนัก เหมาะสำหรับการแสดงสดและใช้งานบนเวที

Classic Analog Octave Divider and Ringer Effects Pedal
Features
- Classic octave divider pedal for guitars, bass, keyboards, and other instruments
- Authentic recreation of the popular Octave Divider* from the ’70s
- Earth-shaking sub-octave effect for powerful sound creation
- Amazing Ringer function for harmonic emphasis of upper tones and special multi-note effects
- Preserves dynamics and harmonic content of the original signal in the sub-octave
- Bass Only switch for extended range and dramatic effects
- Mix control for blending direct and sub-octave signal
- Tone control for ultimate sound shaping
- Stabilize switch locks into all single-voiced signals for improved note tracking
- Auxiliary output to send dry signal to other effects pedals or amplifier
- Power switch and LED to indicate operating status
- Rugged and reliable metal construction
- Power supply included

Divide and Conquer
Musicians from the 1970s always had some sort of secret weapon in their setup. Something they’d turn on in the middle of a raging solo or an effect to create mind-blowing sounds that turned songs into instant classics. David Gilmour had the Phaser and Hendrix had the Octavia. One of those secret weapons you should definitely have on your pedalboard is the Behringer OCTAVE DIVIDER. Turn this baby on and create nice jazzy riffs with a tight bassline underneath or add that much needed top-end sizzle for your epic guitar solo. It can even be used to add a bit more funkiness to bass, keyboards and other instruments. We’re looking at you electric triangle man!

Recreation Done Right
The OCTAVE DIVIDER is an authentic recreation of the popular Octave Divider from the ‘70s. It features an earth-shaking sub-octave effect with its own MIX and TONE controls so you can blend your dry and sub-octave signal, or shape that tone to your taste while still preserving the dynamics and harmonics. The BASS ONLY switch also allows you to completely cut out the dry signal leaving only the sub-octave so you can create your own complex basslines on the fly. The OCTAVE DIVIDER brings all the amazing features from the original ‘70s design, plus a few modern ones, that are sure to fit right at home with any pedal board.

Put Your Tone Through the Ringer
There’s got to be more to it than just adding a sub-octave signal to whatever you’re playing right? The OCTAVE DIVIDER has an amazing RINGER function that adds just the right amount of harmonic emphasis on the upper tones and special multi-note effects through activation of a built-in ring modulator. If you’re into using the OCTAVE DIVIDER to thicken up more complex riffs or just want a nice and tight bass line to a legato, then flipping the Stabilize switch on can also help improve note tracking.

Power and Strength
The original Octave Divider had to be plugged in to a wall outlet. We’ve decided to make it much easier for you to integrate the OCTAVE DIVIDER into your modern-day setup by powering it with standard 9-12 volt DC power. You can also be gig-ready because the OCTAVE DIVIDER has a rugged and reliable metal construction, made to withstand the rigors of the road. – and the heaviest of stomps.