หมวดหมู่สินค้า
ตะกร้าสินค้า

WALRUS AUDIO EB-10 Preamp // EQ // Boost

WALRUS AUDIO EB-10 Preamp // EQ // Boost
6,900.00฿
  • Stock: In Stock
    ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
    *กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 0811-444-729
  • Model: WALRUS AUDIO EB-10 Preamp // EQ // Boost
Walrus Audio
หยิบใส่ตระกร้า
Buy Now Question
เพิ่มในรายการโปรด เปรียบเทียบสินค้า
WALRUS AUDIO EB-10 Preamp // EQ // Boost

A tone tweakers delight, the EB-10 works as a preamp, EQ and boost with three available presets to meticulously craft your guitar's sound allowing for studio-grade electric guitar tone in a live setting. Each rotary knob offers up to 12dB of boost OR cut of Low, Mid, and High frequencies, based on where you have the toggle switches set. When the Boost switch is engaged, add a 10dB MOSFET boost for some great extra punch.

Use the EB-10 to compensate when switching between low and high output instruments. Push through the mix during solos, or even use the onboard presets as three different gain stages by using combinations of increasing boosted EQ settings and the Boost switch! With nine different EQ positions on each knob, bring out new tonal characteristics you didn't know your guitar or bass even had. 

The EB-10 offers two operating modes, “Live” and “Preset”. In live mode, the pedal responds to current position of all the knobs and switches. Dial in a specific sound and turn the pedal on and off with the Bypass switch. In preset mode, the pedal offers preset slots to store three unique sounds.

When in preset mode, the pedal is locked on and the user can scroll through the presets by clicking the Bypass switch. The pedal will boot up in the last known operating mode and if that is preset mode, it loads preset 1 by default. Enter preset mode by pressing and holding the bypass switch for 3 seconds until you see the preset light P1 turn on. Repeat to exit. You are in live mode when all preset lights are off. Refer to the manual on saving presets.

SPECS
Pedal Type : Preamp, EQ, Boost
Compressor/EQ : 3-band EQ
Analog/Digital : Analog
Inputs : 1 x 1/4"
Outputs : 1 x 1/4"
True Bypass : Yes
Additional Features : 10dB Boost, 3 x User Presets
Power Source : 9V DC 100mA Isolated power supply (sold separately)
Power Usage : 100mA
Height : 1.54"
Width : 3.68"
Depth : 4.67"
Weight : 0.74 lbs.

เขียนรีวิว

โน๊ต: ไม่รองรับข้อความแบบ HTML!
ไม่ชอบ ชอบ
0 รีวิว. - เขียนรีวิว
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.