Laney NEXUS TUBE

THE ULTIMATE IN TUBE BASS TONE

The NEXUS-TUBE delivers 400W tube power, coupled with FET and TUBE preamp stages and comprehensive tone shaping it sets the benchmark for bass amps. No less than 8 x KT88 tubes and two oversized toroidal transformers sit in the engine room of the impressive power stage. The high-tech preamp is packed with tonal options: Select and blend both FET and TUBE input paths; Switch in Parametric and/or Graphic Mid shaping; Dial in studio quality compression from a single control. Whether you need clean, fast attack or valve-soaked warmth it is all at your fingertips.

DETAILS

FX loops are important as they allow you to add effects to the signal path in a specific place between the pre-amp and the output section on an amplifier. This is where FX loops are important as it allows you to put time-based FX after the distorted pre-amp section. For example, delayed distortion sounds different to distorted delay – try it.

6 band Graphic EQ 

Hi & Lo Para Mid

KEY FEATURES

• Cabinet Design	Marine Grade plywood cabinet with large grip handles.
  Channels	Fet & Tube
  Class	Class A/B
  Compressor	Single Control for threshold & range with auto level adjust (footswitchable)
  DI Socket	Male XLR (Balanced & Switchable Pre/Post EQ)
  Packed Dimensions (HxWxD mm)	409 x 664 x 516
  Equalisation	Bass & Treble shelving controls, Hi & Lo Para Mid, and 6 Band Graphic EQ
  Footswitch	Yes – FS5 included
  FX Loop(s)	Send & Return Jacks (post EQ, pre Master Volume)
  Impedance	2, 4, and 8 ohms
  Inputs	1x Jack (with 10db Pad switch)

  
  

  Line In	Power amp in
  Link Jack (Line Level Slave)	Yes
  Master Presence Control	Yes – Active Power Stage Feedback Control
  Output Valves	8x KT88
  Power	400 Watts
  Preamp Valves	3x ECC83, 1x 12BH7
  Speaker connections	3x Speakons
  Tuner Output Socket	1x Jack (direct from input, still active when amp muted)
  Weight	39 Kg Packed, 34.5 Kg Unit
  Unit Dims – for int. case (HxWxD mm)