หมวดหมู่สินค้า
ตะกร้าสินค้า

DW Drums Claw Hook Bass Drum Microphone Mount

DW Drums Claw Hook Bass Drum Microphone Mount
New
5,200.00฿
  • Stock: In Stock
    ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
    *กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 0811-444-729
  • Model: (Model: DWSMMH-1 / SMMH-1)
DW Drum DW Drum
หยิบใส่ตระกร้า
Buy Now Question
เพิ่มในรายการโปรด เปรียบเทียบสินค้า
DW Drums Claw Hook Bass Drum Microphone Mount
Brand and Model: DW Drums Claw Hook Bass Drum Microphone Mount (Model: DWSMMH-1 / SMMH-1)
1. Product Overview (Product Overview - DW Drums Claw Hook Mic Holder)
Maximize your low-end studio tracking precision and entirely eliminate microphone floor stand clutter with the DW Drums Claw Hook Bass Drum Microphone Mount (Part Number: DWSMMH-1). This premium-grade, tour-grade professional heavy-duty bass drum microphone holder from Drum Workshop (DW) is engineered as an elite space-saving hardware solution. By clamping securely flat over an existing factory bass drum claw hook assembly on your counter hoop parameter, it positions acoustic microphone capsules precisely inside or near the resonant head port hole, delivering absolute world-class stationary stabilization with zero dynamic play or structure-borne rattle.
2. Key Technical Specifications (Key Features - DW Drums Claw Hook Mic Holder)
  • Seamless Claw Hook System Integration: The primary attachment jaw parameter is precision-molded dimensionally to seat flush straight over the metal spine profile of standard bass drum counter hoop claw hooks. Driven by standard square-head fasteners, it locks down rigidly using a traditional tuning drum key.
  • Flexible High-Friction Knurled Steel Rod: Outfitted with an adjustable, heavy-gauge 1/2-inch diameter solid steel rod featuring a texturized knurled surface path. This design facilitates continuous horizontal slide calibration, allowing sound engineers to micro-adjust outreach insertion depth into the drum cavity cleanly.
  • Micro-Adjustable Toothless Tilter Joint: The apex microphone receiver adapter features DW's signature continuous toothless tilter joint assembly. It provides infinitely variable micro-angle control, locking your target microphone capsule trajectory and capsule slope inclinations rigidly with zero slipping friction under continuous bass vibration forces.
  • Acoustically Isolated Die-Cast Construction: Stamped from high-density solid cast metal alloys calculated to absorb high-impact mechanical shock and damp structural rumble induced by high-velocity kick pedal execution. The brilliant mirror polished chrome finish provides excellent long-term anti-rust protection on tour.
  • Universal Factory Threads Parameter: The apex post is precision-threaded to industry-standard microphone parameters, registering as a direct, seamless match for all major microphone clips, standard shock mounts, and heavy dynamic kick drum microphones.
3. Technical Specifications Table (Technical Specifications - DW Drums Claw Hook Mic Holder)
Specification ItemTechnical Details (Specifications)
Factory Part IdentifierPart Number: DWSMMH-1 / SMMH-1
Hardware ClassificationHeavy-Duty Clamping Acoustic Bass Drum Counter Hoop Claw-Mount Microphone Holder
Mounting PlacementDirect compression seal onto industrial bass drum claw hook spines
Accessory Extension Rod1/2-inch Diameter (approx. 12.7 mm) / Adjustable High-Friction Knurled Solid Steel
Angle Tilter MechanismToothless Continuous Gliding Tilter Joint Setup
Material Compilation MatrixPremium High-Grade Solid Die-Cast Metal Alloys, Polished Mirror Chrome
Locking Fastener StyleUniversal Square Head Tension Screws matching standard drum keys & wing nuts
4. Basic Usage Instructions (Basic Usage Instructions - DW Drums Claw Hook Mic Holder)
  1. Deploying the Clamp over the Claw Spine: Loosen the primary square head fastener on the casing parameter of the DWSMMH-1 mount. Settle the open internal channel cleanly over an existing metal claw hook situated near your resonant head port hole vector. Take a standard drum key and torque the screw down tightly until the mount sits fully rigid.
  2. Calibrating Outreach Insertion Depth: Loosen the secondary vertical wing handle on the bracket housing. Slide the knurled 1/2" steel arm extension rod horizontally through the parameter channels to define your ideal distance between the microphone diaphragm and the inner drum shell cavity. Re-tighten the handle firmly.
  3. Instrument Placement and Vector Angling: Thread your chosen microphone clip or shock mount configuration onto the universal apex thread post. Slide your dedicated kick drum microphone into the holder. Back off the toothless tilter adjustment bolt slightly, pivot the joint to target the sub-low center stroke boundary of the beater impact zone, and tighten down clockwise until completely rigid before tracking.
  4. Tear-Down Protocol and General Maintenance: At stage tear-down, unfasten the square fasteners to release the hardware mount smoothly from the claw parameters for travel packing. Wipe away accumulated sawdust, sweat grime, or road grit from the polished chrome framework parameters using a dry microfiber cloth. Do not apply liquid industrial cleaners inside the thread channels, and store the unit in a dry tour case.

เขียนรีวิว

โน๊ต: ไม่รองรับข้อความแบบ HTML!
ไม่ชอบ ชอบ
0 รีวิว. - เขียนรีวิว
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.