หมวดหมู่สินค้า
ตะกร้าสินค้า

Schaller Guitar Machine Heads M6 Mini

Schaller Guitar Machine Heads M6 Mini
-10 %
1,980.00฿
2,200.00฿
  • Stock: In Stock
    ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
    *กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 0811-444-729
  • Model: Schaller Guitar Machine Heads M6 Mini

ตัวเลือก

Schaller Guitar Machine Heads M6 Mini


Schaller M6 Mini

Smaller and lighter version for Stratocaster™* models, small headstocks or 12-string guitars.

The perfect functionality of the M6 model, combined with the smaller and lighter design with a higher gear ratio 1:18. (*Stratocaster is a protected trademark owned by Fender Musical Instruments Corporation).

All sealed tuners are lubricated with Schaller special grease for lifetime maintenance-free service.

All parts are precision-crafted and surface-finished, the self-locking drive ensures an even, delicate and steady tuning.

All string posts are made of high-grade brass and fitted into the housing with utmost precision, ensuring the best possible tuning accuracy and wear resistance.

 

Instructions Toplocking screw

  • Unscrew the knurled screw on the adjusting axis anti-clockwise until the clamping ball comes off.
  • Now press the strings against the clamping ball. Under pressure, it recedes. You can now put the guitar string through the adjusting axis.
  • Screw the knurled screw clockwise until it is hand tight. The string is now secured by the clamping ball.
  • Now you can tune your strings.
  • Now featuring a metric thread and a specially developed screw locking device, so you don`t lose the screw anymore!
  • When loosening the screws, turn them anticlockwise until the string is tightened into position.
  • When removing the connecing screws completely  from the shafts, simply take the connecting screw out of the shaft at threshold resistance.
  • The Schaller M6 Toplocking with fine pitch thread and pull-off locking screw
  • Fine Pitch Thread for better locking adjustment
  • Our new Toplocking screw with fine pitch thread allows the screw to be turned more precisely and the locking torque to be adjusted more accurately.
  • New pull-off mechanism that makes pulling off as easy as putting back on
  • To prevent the toplocking screw from coming off and getting lost in the process of string changing we designed a new mechanism keeping the loosened screw in place even when it is completely unfastened.
  • To remove the Toplocking screw entirely from the string post just pull it off firmly. To put the screw back on just turn clockwise and tighten lightly.

 

technical specification

gear ratio 1:18, weight 31g (Toplocking 37g) per piece, drill hole button: diameter 4.2 mm with driving surface 3.6 mm

 

scope of supply

6 threaded bushings, 6 step washers, 6 mounting screws

 

technical drawings (without engagement)

Our technical drawings show just a sample of buttons and posts. You`ll find the technical details of our posts by using the configurator chapter „posts“.


 

เขียนรีวิว

โน๊ต: ไม่รองรับข้อความแบบ HTML!
ไม่ชอบ ชอบ
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.