Mooer Prime P2 Intelligent Pedal

1 Enter the jack

6.35 mm (1/4 inch)TS jack. Connect the guitar’s audio cable to your guitar from here.

2 Output jack

6.35 mm (1/4 inch)TRS jack. Connect it to the speaker using an audio cable. You can use the TRS2xTS adapter to achieve stereo output.

3 Earphones

3.5mm (1/8 inch)TRRS jack, with dry connection headphones. If used with a headset (TRS jack), the headset will receive a mixed output signal, i.e. a mixer of guitar input and audio signals received via Bluetooth and/or USB.

4 Control interface touch screen

Displays the currently selected preset. Swipe to display volume controller, tuner, battery status, Bluetooth status, and pedal connection. When P2 is turned off and connected to the power supply, the screen will display the percentage of battery charge status.

5 LED indicator tape

The indicator strip blinks in different colors during startup and lights up each time an input signal is detected.

6 MIDI jack

3.5mm (1/8 inch) jack for connecting MIDI controller.

7 USB-C charging port /OTG port

Connect to a regular 5V, 2.0AUSB-A power adapter (such as a phone charger) using the supplied USB-C to USB-A cable. Connect this port to a computer or mobile device (requires an OTG adapter) to play or record audio.

8 Power Button

Press and hold for 2 seconds to turn on/off; Tap to lock or unlock the touch screen.

9 Reset switch

If P2 does not respond and the device cannot be turned off and back on via the power button, the reset button can be pressed using a paper clip or needle inserted into the hole. This will force the device to close. The device can then be restarted using the power button.