หมวดหมู่สินค้า
ตะกร้าสินค้า

Rode NT1/Ai1 Kit Complete Studio Set

Rode NT1/Ai1 Kit Complete Studio Set
Rode NT1/Ai1 Kit Complete Studio Set
Rode NT1/Ai1 Kit Complete Studio Set
-25 %
Rode NT1/Ai1 Kit Complete Studio Set
Rode NT1/Ai1 Kit Complete Studio Set
Rode NT1/Ai1 Kit Complete Studio Set
13,050.00฿
17,400.00฿
  • Stock: In Stock
    ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
    *กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 0811-444-729
  • Model: Rode NT1/Ai1 Kit Complete Studio Set
Rode NT1/Ai1 Kit Complete Studio Set


RØDE’s AI-1 Audio Interface is stacked with incredible technology to ensure recording on your computer is easy, versatile and sounds superb. The Complete Studio Kit comes with the AI-1, RØDE’s peerless NT1 large diaphragm condenser microphone, a shock mount and all cables. Let’s get started.
As for inputs: the AI-1’s got both kinds…
The AI-1’s single input is a NeutrikTM Combo Jack, which takes both a 3-pole XLR (common to most microphones) and a quarter-inch jack common to most electric instruments like guitar, bass et al. Layering tracks is as easy as plug in, set level and go.
No cords barred (and other puns)
The Complete Studio Kit comes with the RØDE NT1 studio condenser microphone, a shock mount, pop-shield, RØDE XLR cable and USB-C/A cables to transfer data from your AI-1 to your computer, and power – including 48V phantom power to your AI-1.
Superior Headphone Amplifier onboard
Not only does the AI-1 deliver crystal clear audio to your computer software, but headphones have never sounded sweeter thanks to the discrete studio-quality headphone output and level control.

SPECIFICATIONS

  • AI-1 Studio-Quality USB Audio Interface
    Analog Inputs and OutputsInput: 1 x Neutrik XLR-1/4″ / 6.35 mm combo
    Outputs: 2 x 1/4″ / 6.35 mm (impedance balanced), 1 x 1/4″ / 6.35 mm (headphones)
    Computer ConnectivityUSB Type-C
    Form FactorDesktop
    Mic Preamps1
    Phantom PowerYes
    Bit Depth24-bit
    Sample Rates44.1, 48, 88.2, 96 kHz
    Zero-Latency Direct MonitoringYes
    USB Bus PoweredYes
    OS RequirementsMac OS X 10.10 or later
    Windows 7 or later
    Dynamic Range104 dBu
    Equivalent NoiseEquivalent Input Noise at Maximum Gain: -128 dBA (source impedance 150 ohms, 20 Hz to 20 kHz, A-weighted)
    Frequency Response20 Hz to 20 kHz (better than ±1 dB, measured after ADC)
    Gain Range0 to 45 dB
    Input ImpedanceXLR Mic Input: 1.3 kOhms
    Instrument Input: 0.9 MOhms
    Monitor OutputsMax Output Level: -6 dBu
    Headphone OutputMax Output Power (at 1% THD):
    32 Ohms, 24 mW,
    300 Ohms, 245 mW
    Dimensions (D x W x H)3.9 x 4.9 x 1.5″ / 100.0 x 124.0 x 38.0 mm
    Weight19.8 oz / 561.3 g
    Packaging Info
    Box Dimensions (LxWxH)6.9 x 5.0 x 2.5″
  • NT1 Cardioid Condenser Microphone (Microphone Only)
    Analog Performance
    Operating PrinciplePressure Gradient
    TransducerCondenser
    Diaphragm1″ / 25.40 mm
    Polar PatternCardioid
    Frequency Range20 Hz to 20 kHz
    Equivalent Noise Level4 dB A-Weighted
    Maximum SPL132 dB SPL
    THD1%
    Impedance100 Ohms
    Sensitivity-29 dB
    General
    Output Connectors1 x 3-Pin XLR
    Operating Voltage24 V
    48 V
    Length7.36″ / 187 mm
    Diameter1.97″ / 50 mm
    Weight0.97 lbs / 440 g
    Packaging Info
    Box Dimensions (LxWxH)9.1 x 5.5 x 3.4″
  • SMR Advanced Shock Mount for Large Diaphragm Condenser Mics
    Dimensions5.0 x 9.0 x 8.3″ (130 x 220 x 210 mm)
    Weight9.2 oz (260 g)

เขียนรีวิว

โน๊ต: ไม่รองรับข้อความแบบ HTML!
ไม่ชอบ ชอบ
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.