SE Electronic sE5 Stereo Pair

• Cardioid Polar Pattern  The sE5’s cardioid polar pattern delivers a clean and smooth on-axis response, with off-axis rejection that’s essential when recording the source instrument in-situ among unwanted noise sources such as other instruments or room ambience.

• 100Hz Bass Cut The sE5’s 100Hz bass cut can be applied to decrease the level of proximity effect, which is typical behaviour in cardioid pattern microphones if placed very close to the sound source, or to isolate from low frequency rumble from other sources.

• -10dB/-20dB Pad The two pad switches can be used if you’re recording a very ‘hot’ or loud signal. For miking up loud sound sources such as drums or a guitar cabinet, the -10dB or -20dB settings will reduce the level output from the microphone to the connected microphone preamp, ensuring a high quality signal is delivered.

• Matte Black Finish The matte black finish minimises the level of attention drawn to the microphone when used on stage or in the studio, allowing it to blend into the background.

• Includes Custom sE5 Shock Mount , Stereo Bars, and Flight Case The sE5 Pair includes a stereo bar and a pair of custom-designed shock mounts, which are essential for reducing the unwanted effects of vibration or knocks to the supporting microphone stand. The sE5 Pair comes in an sE Electronics flight case.

Specs

• Directional pattern: Cardioid
• Frequency range: 20Hz – 20kHz • Sensitivity: -34dBV/ Pa
• Rated impedance: 200 ohms
• Equivalent noise level: 14 dB
• Signal-to-noise ratio: 80 dB
• Maximum SPL: 170 dB
• Supply voltage: 48V